Whirlpool ACM 843/LX Istruzioni per l'uso Scaricare il pdf (Pagina 9)

EN17

Control Panel Description

The control panel is equipped with touch controls: to use them, just press the corresponding symbol (it is not necessary to press hard).

First use / after a power failure

After connecting the hob to the electrical power supply, the control panel is locked (the indicator light above the key is ON).

To unlock the control panel, press and hold the key for 3 seconds. The indicator light switches off and the hob can be used normally.

Switching the hob ON/OFF

To switch the hob on, press and hold the key for approx. 2 seconds: the indicator light above the key turns on and hyphens appear inside the cooking zone circles.

To switch off, press the same key until the hob switches off. All the cooking zones are switched off.

Switching on and adjusting cooking zones

After switching on the hob, position the pot on the chosen cooking zone.

Activate the cooking zone by pressing the relative round key: the round key displays number 5 that corresponds to the intermediate power level.

To change the power level, move your finger horizontally on the slide touchscreen: the number inside the circle will change with just a quick slide of the finger from a

minimum of 1 to a maximum of 9. You can activate the booster function by pressing “BOOST” on the slide touchscreen (“P” on the display).

Switching off cooking zones

Select the cooking zone to be switched off by pressing the relative round key (a dot lights up at the bottom right of the power level indicator). Press OFF on the slide

touchscreen.

INSTRUCTIONS FOR USE

The hob automatically switches off if no function is selected within 10 seconds of switching on.

The hob automatically switches off if no function is selected within 10 seconds of switching on. If you are using a pot that is not suitable, not correctly

positioned or not of the correct dimensions for your induction hob, the message “no pot” will appear in the display (see figure on the left). If no pot is

detected within 60 seconds, the hob switches off.

If more than one cooking zone is on, the slide touchscreen allows you to change the power level of the selected zone, indicated by the presence of a

luminous dot at the bottom right of the power level indicator. To select a zone, simply press the relative round key.

The cooking zone switches off and, if the zone is still hot, the letter “H” appears in the circle.

“H” is the residual heat indicator. The hob is fitted with a residual heat indicator for each cooking zone; these indicators alert the user when cooking

zones are still hot. When the cooking zone cools down, the display switches off.

To select and activate the cooking zones

Hob ON/OFF

To set the minute

counter

To enable the hold

function

Slide touch screen To lock the control panelTo select one of the automatic functions

Indicates that one of the automatic functions is On

Cooking zone timer

Cooking zone selection and selected cooking zone/power level display

Slide touchscreen (power adjustment)