Whirlpool ACM 843/LX Istruzioni per l'uso Scaricare il pdf (Pagina 11)

EN19

• Read and follow the instructions given in the section “Instructions for use”.

• Connect the hob to the electricity supply and check that the supply has not been shut off.

• Clean the hob and dry it thoroughly.

• If you are unable to turn the hob off after using it, disconnect it from the power supply.

• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.

Before contacting After-sales Service

1. See if you can eliminate the problem on your own by referring to the “Troubleshooting guide”.

2. Turn the hob off and on again to check if the problem has been eliminated.

If after the above checks the fault persists, contact the nearest After-sales Service.

Always specify:

• a short description of the fault;

• the type and exact model of the hob;

• the Service number (the number after the word Service on the rating plate) located under the appliance (on the metal plate). The Service number is also

indicated on the warranty booklet;

• your full address;

• your telephone number and area code.

If any repairs are required, please contact an authorised After-Sales Service (to guarantee that original spare parts will be used and repairs carried out correctly).

TROUBLESHOOTING GUIDE

ERROR CODE DESCRIPTION POSSIBLE CAUSES REMEDY

The hob switches off and after 10 seconds

emits an acoustic signal every 30 seconds.

Continuous pressure on control panel

area.

Water or utensils on control panel. Clean the control panel.

C81, C82, C83 The control panel switches off because

of excessively high temperatures.

The internal temperature of electronic

parts is too high.

Wait for the hob to cool down