Whirlpool LTG6234DQ5 Manuale Utente

27" (69 CM) GAS WASHER/DRYERINSTALLATION INSTRUCTIONSWASHER/DRYER SAFETYTable of ContentsWASHER/DRYER SAFETY...2INSTAL

10Plan Vent SystemChoose your exhaust installation typeRecommended exhaust installationsTypical installations vent the dryer from the rear of the wash

11Determine vent path Select the route that will provide the straightest and most direct path outdoors. Plan the installation to use the fewest num

3. Install the adapter on the ½" rigid gas supply pipe using pipe-joint compound.NOTE: For LP gas connections, you must use pipe-joint compound r

2INSTALLATION INSTRUCTIONSTools and PartsGather the required tools and parts before starting installation. Read and follow the instructions provided w

3Parts supplied:Remove parts package from the washer basket. Check that all parts are included.Parts needed for dryer:Check local codes and with gas s

4Washer/Dryer Dimensions*Most installations require a minimum 5" (12.7 cm) clearance behind the dryer for the exhaust vent with elbow. See “Venti

5Electrical Requirements A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is rec

6 Must include a shutoff valve:An individual shutoff valve must be installed within 6 feet (1.8 m) of the washer/dryer in accordance with the Nationa

7 Flexible metal vent must be fully extended and supported when the dryer is in its final location. Remove excess flexible metal vent to avoid sagg

8Install Leveling LegsInstall the front leveling feet1. Prop up the front of the washer/dryer about 4" (10.2 cm) with a wood block or similar obj

9Connect the inlet hoses to the water faucetsMake sure the washer basket is empty.2. Attach hose to the hot water faucet. Screw on coupling by hand un