Whirlpool AKT 970/IX Istruzioni per l'uso Scaricare il pdf (Pagina 3)

INSTALLATION

Assembly

A) If the worktop is made of wood, use the appropriate

brackets, spring clips and screws provided.

• Position the 4 clips (A) around the hob frame, in the slots

provided, see Fig. 1

• Measure the centre of the vertical sides of the cut out a

shown in Fig. 2.

• Position the centre of the brackets (C) on the centre of the

side previously identified.

• The upper edge of the brackets must be flush with the

worktop surface.

• Secure by means of the 4 screws (B) provided, using the

pre-drilled holes.

• Insert the hob into the pre-prepared hole ensuring that the

clips (A) lodge into the bracket slots provided (C Fig. 4 e 5).

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 5

31902060GB.fm Page 14 Friday, October 8, 2010 4:48 PM

1 2 3 4 5 6 7 8

Nessun commento

Whirlpool AKT 970/IX Istruzioni per l'uso Pagina 3